Starizona

This adapter is similar to the M54 to M48 step ring that comes with the ZWO 2" filter wheel, but it adds a thin lip to allow the ring to stop again...

20mm adapter that connects Starizona's Filter Slider to an M48 thread. The adapter has female M48x0.75 threads on the telescope side and male Filte...

This is a replacement gear. Starizona Motors come with the needed gears to use them.

Use this sturdy, 3D-printed plastic bracket to attach a standard red-dot type finderscope to the flash hot shoe on top of your Canon DSLR. The find...

Use this adapter to connect a T-ring or T-mount camera to a 1.25" focuser. Low profile design keeps backfocus short. Threaded for standard 1.25" fi...

Features Automatic focus with ASCOM-compatible software (FocusMax, MaxIm DL, Sequence Generator Pro, etc)* Temperature compensation using built-in...

Starizona is pleased to announce a new, low-profile motor for our popular MicroTouch Autofocuser. The MicroTouch works with any Feathertouch Focuse...

Accurate balance is necessary for the best telescope performance. Adding heavy accessories such as 2" eyepieces or cameras to a scope requires the ...

Use this adapter to attach accessories with standard SCT female threads (such as a focal reducer) to a 2" focuser or visual back. This adapter has ...

A T-Ring is one of the first accessories you will need to take pictures through a telescope or spotting scope. If you have a Sony E-mount mirrorles...

Sorbothane gasket used in HyperStar conversion kit for Celestron 6" SCTs. Useful for retrofitting a factory-installed Fastar secondary assembly so ...

This adapter threads into the front (telescope side) threads of the SkyWatcher EvoStar ED focal reducer, allowing the reducer to be placed directly...

Note: This version of the Landing Pad is for the original style black Celestron tripods, not the new silver tripods. Using a NexStar GPS telescope ...

Adapter for HyperStar 11 or HyperStar 9.25 and ZWO M42 Filter Drawer for ZWO Cooled Cameras

This version of the Counterweight Set will only work with the CPC-800. For other Celestron 8" SCTs, click here.Accurate balance is necessary for th...

Looking to permanently mount your CPC telescope? You'll want this adapter kit to easily attach the CPC fork mount to a permanent pier. The top plat...

Use this adapter to put a 2" male nosepiece onto the original (non-modular) Starizona Filter Slider to use on anything that accepts a 2" barrel.   ...

The Feathertouch 3.5" focuser is the industry standard for a high-quality, large focuser and is included as standard equipment or an optional upgra...

Starizona M42 female threaded cap.

Show all your astronomer friends that you are not only cool but stylish as well with this Starizona ballcap. Adjustable fit.

*** Currently Unavailable - Working on new regular and HD ***   With the 0.4x focal reduction factor, the field of view becomes 2.5x wider and expo...

This item is the MicroTouch system, less the focus motor, for users who already own a Feathertouch focus motor. It includes the hand controller, US...

Additional threaded 2.5-pound bottom counterweight for Starizona counterweight sets (for NexStar GPS and CPC telescopes). Necessary for heavy loads...

The new Starizona SCT Corrector requires the proper camera adapter to achieve the correct lens-to-CCD distance. This ensures the best optical perfo...

This adapter allows the use of a Feathertouch SCT MicroFocuser on an older Celestron 8" SCT (orange tube and some older black tube models). Include...

Use this sturdy, 3D-printed plastic bracket to attach a standard red-dot type finderscope to the flash hot shoe on top of your Nikon DSLR. The find...

Accurate balance is necessary for the best telescope performance. Adding heavy accessories such as 2" eyepieces or cameras to a scope requires the ...

This is the top half of the Celestron 8" SCT counterweight set. Use this if you already have a bottom slidebar kit from Celestron or Losmandy. Incl...

This version of the Counterweight Set will not work with the CPC-800. For the correct version, click here.Accurate balance is necessary for the bes...

The NOMAD star tracker from Move Shoot Move is a super handy portable tracking mount for shooting Milky Way photos with a DSLR or mirrorless camera...

Use this female T-thread to male T-thread spacer to extend standard T-thread adapters to achieve the correct backfocus for your telescope. Availabl...

Details: - 55mm Long - SCT Female Threads - Takes 2" eyepieces and diagonals

Use this adapter if you have a HyperStar lens and need to adapt it to a Celestron Edge HD telescope. This adapter is included with the Edge HD Hype...

To achieve true dynamic balance with a fork-mounted SCT, both top and bottom weights are required. See stock number CWCPC11-CS for the complete top...

This adapter enables you to mount your unmounted 50.8mm filters to 48mm threads. This mount will allow you to use unmounted 50.8mm filters with Sta...

The high-quality CNC machined diagonal, with its matte interior coating and gloss oxidized surface, brings a more premium texture and a more comfor...

Use this female T-thread to male T-thread spacer to extend standard T-thread adapters to achieve the correct backfocus for your telescope. 21mm in ...

Use this female T-thread to male T-thread spacer to extend standard T-thread adapters to achieve the correct backfocus for your telescope. Availabl...

Use this female T-thread to male T-thread spacer to extend standard T-thread adapters to achieve the correct backfocus for your telescope. Availabl...

This adapter converts T-threads (M42) to C-threads (1.0"). It has female T-threads on the bottom and male C-threads on the top. The adapter adds 5....

Use this adapter to connect a T-ring or T-mount camera to a 2" focuser. Low profile design keeps backfocus short. Threaded for 48mm filters.

Extra stepper motor for the MicroTouch Autofocuser. This motor fits the standard Stellarvue focusers that have a 25mm mounting diameter. A larger s...

Note: This version of the Landing Pad is for the newer style silver Celestron tripods, not the original black tripods. It includes different bolts ...

This version of the Counterweight Set will not work with the CPC-1100. For the correct version, click here. Accurate balance is necessary for the b...

The ALP-T dual band 3.5nm SII&Hb filter is a dual narrowband filter, which lets the deep red Sulfur-II 672.4nm and the blue Hydrogen-Beta 48...

This replacement adapter came with the original Starizona RASA8 Filter Slider converting the bottom M48 to M42 and adding 1mm to the Filter Slider ...

Optional upgrade from a wired MicroTouch autofocuser to a wireless model after purchase.The MicroTouch hand control must be returned to Starizona f...