Starizona

20mm long adapter from female M48x0.75 to male M48x0.75 threads.  This can be useful to get 55mm backfocus with a ZWO cooled camera (17.5mm) and St...

7.5mm M42 to M42 spacer

Sorbothane gasket used in HyperStar conversion kit for Celestron 9.25" SCTs. Useful for retrofitting a factory-installed Fastar secondary assembly ...

The Starizona Cool Edge was named one of Sky & Telescope's Hot Products for 2012! This innovative product from Starizona is designed to hel...

M54 male to M54 male adapter.  Adds 1mm to backfocus.  Useful for attaching a ZWO 6200 camera to the ZWO 2" filter wheel without bolting the wheel ...

This kit allows a non-HyperStar-compatible SCT to be converted into a compatible telescope. The kit includes three components that replace the orig...

The only purpose of this adapter is to replace the top of an already existing HyperStar adapter to change its thread type.  An example of this is i...

20mm adapter that connects Starizona's Filter Slider to an M42 thread. The adapter has female M42 threads on the telescope side and male Filter Sli...

This stainless steel counterweight can be used as an addition to the top portion of the Starizona's Counterweight Kit or as additional weight for b...

This is the top camera adapter plate for our T-Adapter with Filter Holder for large EdgeHD scopes.  The T-adapter normally comes with M42 threads, ...

Features Automatic focus with ASCOM-compatible software (FocusMax, MaxIm DL, Sequence Generator Pro, etc)* Temperature compensation using built-in...

This filter step ring is made specifically with the Starizona Filter Slider system in mind. It steps the M48 threads of a standard 2" filter down t...

  The Starizona Cool Edge was named one of Sky & Telescope's Hot Products for 2012! This innovative product from Starizona is designed to...

  The Starizona Cool Edge was named one of Sky & Telescope's Hot Products for 2012! This innovative product from Starizona is designed to...

Use this female T-thread to male T-thread spacer to extend standard T-thread adapters by 16.5mm.

The Starizona Balance Box is used to measure the current being drawn by a telescope mount to determine if the mount is properly balanced. With s...

Use this adapter if you have a HyperStar lens and need to adapt it to a Celestron Edge HD telescope. This ring replaces the bottom ring on the stan...

  The Starizona Cool Edge was named one of Sky & Telescope's Hot Products for 2012! This innovative product from Starizona is designed to...

Use this adapter if you have a HyperStar lens and need to adapt it to a Celestron Edge HD telescope. This ring replaces the bottom ring on the stan...

T-Adapter attaches an SLR or DSLR camera to a Schmidt-Cassegrain telescope for prime focus photography Threads on to the rear cell of Schmidt-Cass...

This adapter is similar to the M54 to M48 step ring that comes with the ZWO 2" filter wheel, but it adds a thin lip to allow the ring to stop again...

Sorbothane gasket used in HyperStar conversion kit for Celestron 14" SCTs. Useful for retrofitting a factory-installed Fastar secondary assembly so...

This kit allows a non-HyperStar-compatible SCT to be converted into a compatible telescope. The kit includes three components that replace the orig...

This stainless steel counterweight can be used as an addition to the top portion of the Starizona's Counterweight Kit or as additional weight for b...

Use this adapter to connect a T-ring or T-mount camera to a 1.25" focuser. Low profile design keeps backfocus short. Threaded for standard 1.25" fi...

This is a replacement gear. Starizona Motors come with the needed gears to use them.

20mm adapter that connects Starizona's Filter Slider to an M48 thread. The adapter has female M48x0.75 threads on the telescope side and male Filte...

Sorbothane gasket used in HyperStar conversion kit for Celestron 6" SCTs. Useful for retrofitting a factory-installed Fastar secondary assembly so ...

Use this sturdy, 3D-printed plastic bracket to attach a standard red-dot type finderscope to the flash hot shoe on top of your Canon DSLR. The find...

Starizona is pleased to announce a new, low-profile motor for our popular MicroTouch Autofocuser. The MicroTouch works with any Feathertouch Focuse...

Use this adapter to attach accessories with standard SCT female threads (such as a focal reducer) to a 2" focuser or visual back. This adapter has ...

Features Automatic focus with ASCOM-compatible software (FocusMax, MaxIm DL, Sequence Generator Pro, etc)* Temperature compensation using built-in...

Accurate balance is necessary for the best telescope performance. Adding heavy accessories such as 2" eyepieces or cameras to a scope requires the ...

Adapter for HyperStar 11 or HyperStar 9.25 and ZWO M42 Filter Drawer for ZWO Cooled Cameras

This adapter threads into the front (telescope side) threads of the SkyWatcher EvoStar ED focal reducer, allowing the reducer to be placed directly...