In Stock

This 3D-printed case is made to hold the filter drawer from our Filter Slider. The drawer with filter installed fits into the case for protection a...

The ApexEd Threaded Focuser Adapter works on a verity of focuser options. You can pick between M42 or M48 male camera facing threads. Each Threaded...

The Antlia Triband RGB Ultra Filter II adds the H-Beta 486.1nm line to the Triband RGB Ultra, enhancing its ability to capture finer details of neb...

The filter drawers can be pulled in and out using a small knob. This knob is required because the filter slider will be completely flush with your ...

The NexStar SE Bracket tilts the hand controller at a convenient 30-degree angle, making it easy to read the LCD and use the controller even while ...

Have a Modular Filter Slider but need to change the attachment threads?  We got you covered.  These plates can be used on both the top and bottom o...

Once installed (see instructions at bottom), the actions appear in the Actions palette in Photoshop and a selected action may be “played” by simply...

Purchase additional filter holders to easily use multiple filters with the Starizona Filter Slider. Holds standard 2" mounted filters with 48mm thr...

  ASI120MINI Camera Sensor The ASI120MM Mini camera integrates the AR0130CS 1/3″ sensor (4.8 mm x 3.6 mm). It is a new model in the “mini”-se...

This bracket is designed to work with C8, C9, C11 and C14 the Celestron SCT scopes. You can directly connect it to the scopes without using the fe...

Our solution was to make a level that fits onto a convenient surface on the mount and converts that angled surface into a horizontal one. The AVX L...

35.3mm T-to-T spacer (M42 female to M42 male).  This adapter takes up 35.3mm of the Starizona SCT Corrector's 90.3mm back focus. Leaving 55mm of ba...

Works with ZWO Cameras and ZWO ASIair Works on Celestron Mounts and Products 8ft long cord (including extension) 2.1x5.5 Male Connector Center po...

The Starizona RASA 8 Filter Holder allows you to use 2" filters with the Celestron RASA 8" telescope with cameras that are not compatible with a Fi...

Updated, more robust design! This bracket will fit the existing finderscope mounting holes on SCT telescopes.  It fits common finderscope style fee...

Virtual View - The Visual Back with a Twist! Have you ever been to a star party with both kids and adults and wished you had an easy way to adjust ...

PE200 PE160

Our 3D printed EvoGuide 50 Clamshell is designed to make it easy to mount the SkyWatcher EvoGuide 50 refractor and a guidescope for wide-field imag...

Now includes couplers for both the original EAF (5mm shaft) and the new EAF (4mm shaft). Starizona's EAF Bracket for Feathertouch Focusers allows y...

Together with the highly transparent in main nebula emission lines at OIII(496nm and 500nm), H-beta (486nm), NII(654nm and 658nm), H-alpha(656nm) a...

This machined aluminum bracket is designed to allow mounting of the ZWO EAF focus motor to the SkyWatcher Esprit line of refractors.  Mounting hard...

This filter step ring is made specifically with the Starizona Filter Slider system in mind. It is zero profile, adding no extra height to the 1.25"...

This is the handiest device ever invented for telescopes. The Telrad works like the heads-up display in a fighter jet, appearing to project a red b...

Starizona's QuickSwitch allows the use of a ZWO EAF focus motor on an SCT while maintaining the ability to manually focus.  This makes it easy to s...

This Filter Blank for the Starizona Filter Slider fits into a holder just like a filter but is solid to provide a "shutter" for taking dark frames ...

This T-adapter from Starizona provides the same backfocus distance as the standard T-adapter from Celestron (#93646), but also offers 48mm (2") fil...

96000mAh/307.2Wh  Portable Power Station GP50 Product Features: Dual 12V cigar lighter socket output—Support Cpap/Car fridge/CameraUSB-C PD 60W—S...

Starizona's 3D Printed SeeStar Solar Finder. Helps you find the sun! Used in conjunction with the SeeStar Solar filter. Simply place the Solar Find...

This 3D printed bracket and mounting ring features a clamshell to hold the EvoGuide 50 OTA, plus a ZWO EAF autofocus motor and accessories such as ...

ZWO 230mm Counterweight Balance Bar for AM5 Mount For payloads heavier than about 28 lbs. (13 kg), the ZWO AM5 Equatorial Mount requires a counterw...

Focus mask for Sky-Watcher Evoguide 50 APO Refractor.

The casing of the hand controller uses environment-friendly ABS material.  It has a 3.5mm female socket. You will have a very comfort grip when yo...

Starizona's variable M42 T-Thread adapters available in three sizes.     Available Sizes: 15mm - 20mm 20mm - 30mm 30mm - 45mm